Vinyl siding can be installed over wooden siding to transform the appearance of your home. But there are some things that you need to be careful about. First, ensure that your siding can withstand the elements. You will need to install a moisture barrier. This can be done with a polyethylene sheet. Next, you will seal the seams using vapor barrier tap. The final step involves nailing the moisture barrier into furring strips to hold the siding in position.
After you've assessed the condition and repaired any damage to your siding, it's time to make adjustments to the doors or windows in the house. For example, if you have casement windows, the new thickness of your walls may require that the frames be enlarged. The trim around your windows will need to be removed if they are too set in.
Wood siding should be removed if it has any decay, mold, or rot. You'll also need to replace it with fresh boards. Contractors can repair damaged siding. If the problem you are having is not structural, you may leave it alone.
Before you begin, find out how many pieces of wood sheathing are attached to your home. You should remove at most a few inches of this wood. A measuring tape is useful to determine the length or width of the sheathing. You will need to be able place the siding panels onto the flat surface without them being too far apart. It is also a good idea for walls to be padded with rigid foam.
Before you can put vinyl siding over existing wood siding, trim, windows and doors must be removed. Also, make sure your house is level. This makes aligning siding panels at corners easier.
To hold the vinyl siding panels in their place, you will need to create a starter strip. This is usually a vertical strip of lumber, and it should be installed about an inch above the wood siding on each side. Typically, it's recommended that you install the strip with a 16-inch interval. By placing nails in each of the slots, you can attach the starter strip to the wall. To attach the starter strip to your wall, place the nails in the center of the slot.
Vinyl siding should be installed over wood siding. You must take care not to damage your sheathing. If you aren't sure, consult a contractor who is familiar with installing vinyl siding. Also, be aware of potential issues with outdoor light fixtures, gutters and other problems.
FAQ
What room should I remodel first?
The heart and soul of any home is the kitchen. It's where you spend most of your time eating, cooking, entertaining, and relaxing. Start looking for ways that you can make your kitchen functional and more attractive.
Bathrooms are an important part any home. It provides comfort and privacy while you take care of everyday tasks, such as bathing, brushing teeth, shaving, and getting ready for bed. This will make these rooms more functional and beautiful.
How can you renovate your house without spending a lot of money?
The following steps should be taken when renovating a house without any money:
-
A budget plan should be created
-
Find out the materials you require
-
Decide where you want to put them
-
Make a list.
-
Figure out how much money you have available
-
Plan your renovation project
-
Get to work on your plans
-
Do some online research
-
Ask friends and family for help
-
Get creative!
Is it better for a contractor to hire or a subcontractor to do the job?
Hiring a general contract is typically more costly than hiring subcontractors. A general contractor often has many workers, which means they can charge their clients more for labor. Subcontractors, on the contrary, hire one employee and charge less per hour.
How much does it cost for a house to be renovated?
Renovations cost typically $5,000 to $50,000. Renovations typically cost homeowners between $10,000 and $20,000
Statistics
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- Design-builders may ask for a down payment of up to 25% or 33% of the job cost, says the NARI. (kiplinger.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
External Links
How To
Do you renovate interior or exterior first?
Which one should I do first?
When choosing which project to begin with, there are many things to take into consideration. The most important factor to consider is whether the building has been around for a while. The condition of the roof, windows and doors, flooring, wiring, and other aspects are all important. If the building is new, then there are many different aspects to think about such as the location, size, number of rooms, style, etc.
The roof should be the first thing you look at if the building's age is a concern. If your roof seems like it is about to fall apart, then you should get on with the renovation. If the roof is fine, then you can move onto the next step. Next, examine the windows. The windows should be inspected for damage or dirt before you do anything else. Next, clean the doors and ensure that they are free of debris. Once everything is clean, you can then begin to put the floors together. Make sure that the flooring is solid and sturdy so that no matter how hard you walk on it, nothing breaks. These steps will be completed before you can proceed to the walls. Examine the walls carefully to determine if there are any cracks or other damage. If the wall is intact, then you can move to the next step. You can now inspect the ceiling. It is important to inspect the ceiling and ensure it is strong enough for any weight you may place on it. If all is well, then you are ready to move on to the next phase of your renovation.
If your building was constructed recently, you might want to look at the exterior. The exterior of the home should be examined first. Is the house well-maintained? Is there any cracks? Does it look great? If the exterior doesn't look great, then you should definitely fix it. Your home shouldn't look shabby. Next, inspect the foundation. The foundation should be inspected for weakness and repaired. Also, make sure to inspect the driveway. It should be flat and smooth. If it's not, it should be fixed. The sidewalk should be checked as well when you inspect the driveway. It should be replaced if it is uneven.
Once you've checked all these areas, it is time to move on the inside. Look at the kitchen first. Are you satisfied with the cleanliness and maintenance of your kitchen? You should clean up any mess. Next, inspect the appliances. These appliances should be in top shape and functioning properly. If they're not, you can either replace them or repair them. Check the cabinets after this. You can paint them if the cabinets are stained or damaged. If they are in good shape, then you can move to the bathroom. In here, you should check the toilet. You should replace it if it leaks. If the surface is just dirty, it should be washed. Next, examine all the fixtures. Make sure they're clean. If they are dirty, then you should definitely clean them. The countertops should be inspected as well. They should be repainted if they are chipped or cracked. Use a sealant if they're shiny and smooth.
Final step: Check your furniture. Verify that the furniture is not damaged or missing. If you find something missing, it's best to fix it. You should fix anything broken. After you've checked everything, it is possible to move outside and complete the job.