Vinyl siding can look great over wood siding. But there are some things that you need to be careful about. The first step is to make sure that your siding will be able to withstand the elements. Installing a moisture barrier is necessary. A polyethylene sheet works well. Next, you will seal the seams using vapor barrier tap. The last step is to secure the moisture barrier onto the furring strips that will hold the siding.
After you have assessed the condition of your siding you can adjust some doors or windows in your house. The new thickness of your walls might require the expansion of the frames for casement windows. Remove the trim around windows that have been set in a bit.
It is important to remove any mold, decay, or rot from your wood siding. It will also be necessary to replace the siding with new boards. If your siding has been damaged, you can hire a contractor to fix it. If the problem isn't structural, you can leave it in place.
Before you start, find out how much wood sheathing has been attached to your house. You should remove at most a few inches of this wood. A measuring tape can be used to measure the length of the sheathing. You will need to be able place the siding panels onto the flat surface without them being too far apart. It is a good idea also to cover any imperfections in the walls with rigid foam.
Before you can begin to install vinyl siding onto your existing wood siding, you'll need to get rid of any trim, windows, or doors. Also, make sure your house is level. This makes it easier to align siding panels at corners.
To hold the vinyl siding panels in their place, you will need to create a starter strip. This is usually a vertical strip of lumber, and it should be installed about an inch above the wood siding on each side. Typically, it's recommended that you install the strip with a 16-inch interval. Attach a starter section to your wall using nails placed in the middle. To attach the starter strip to your wall, place the nails in the center of the slot.
You should take care to not damage your sheathing when installing vinyl siding on top of wood siding. If you're unsure, you'll need to meet with a contractor who has experience in installing vinyl siding. You should also be ready for any potential complications with outdoor light fixtures, gutters, or other issues.
FAQ
How do you choose a good contractor to work with?
Ask your family and friends for recommendations when choosing a contractor. Look online reviews as well. It is important to confirm that the contractor that you choose has worked in the same area as you. Refer to previous clients and verify their references.
What should I do if I want to hire an architect/builder?
You might find it easier to hire someone to do your home renovations. If you're looking to purchase a home, an architect or builder can help you achieve your goals.
Is it better to hire either a general or subcontractor?
The cost of hiring a general contractor can be higher than that of a subcontractor. General contractors often have many employees and charge clients high labor costs. A subcontractor on the other side only employs one person, so he/she charges less per-hour.
What should I do first in a house renovation?
Clean out your home and get rid of all clutter. You will need to clean out all moldy areas and repair any leaky pipes. Finally, you'll need to repaint the interior. Next, clean the exterior surfaces and paint.
How important is it to get pre-approved for a loan?
It's important to be pre-approved for mortgages. This will allow you to determine how much money you can borrow. It will also help you determine if you are qualified for a specific loan program.
Statistics
- Design-builders may ask for a down payment of up to 25% or 33% of the job cost, says the NARI. (kiplinger.com)
- They'll usually lend up to 90% of your home's "as-completed" value, but no more than $424,100 in most locales or $636,150 in high-cost areas. (kiplinger.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
- According to the National Association of the Remodeling Industry's 2019 remodeling impact report , realtors estimate that homeowners can recover 59% of the cost of a complete kitchen renovation if they sell their home. (bhg.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
External Links
How To
How to Renovate an Old House?
First, you need to decide what kind of renovation you want. This could range from simple updates to your kitchen appliances, to completely changing the look of the entire house.
After you've determined the type of renovation you want, you should consider how much money you can spend. It is possible that you don’t have the funds necessary to pay for the entire cost of the project. If this is the case, then you need to make some tough decisions about which areas of the house you can afford to improve and which ones you can't.
You need to be sure that before you do any renovations you are aware of the following things. The first thing to do is ensure you get the necessary permits. Also, check to see if you need planning permission in order to do certain types work. To add extensions to your home or make other changes, you might need building consent.
It is a good idea to verify with the local council before you begin work on your house. Also, check whether you need planning permission for each part of the house that you intend to renovate. To make sure you have enough coverage, contact your insurance provider if you intend to perform any major works, such as installing new roofs.
After obtaining all permits, the next step is to select the right tools and materials. There are many options, so take the time to thoroughly research them. Some of the most common items that people use during their renovation projects include paint, wallpaper paste, flooring, tiles, carpets, insulation, fencing, doors, windows, lighting, plumbing, heating systems, electrical wiring, plasterboard, timber, concrete, bricks, tiling, mirrors, sinks, taps, toilets, washing machines, ovens, refrigerators, microwaves, dishwashers, vacuum cleaners, carpet cleaning equipment, air conditioning units, fireplaces, chimneys, and even garden furniture!
When choosing these items, remember to look at the quality of the product. Cheap products tend to last only a short period of time, whereas good quality products will usually last longer and provide better value for money. When you are buying any item, ensure that you only purchase what is necessary for the job. Don't buy too many because you could end up wasting precious resources and having to discard large quantities of material. Instead, purchase only what you need.
After you've selected the right materials for your job, you should plan where to store them while working on the property. Renting storage space might be necessary if you plan on renovating a large part of your home. This will allow you to store all your supplies until you have them ready to go. Another option is to ask friends and family to help you move the items.