If you're looking for a way to give your home a fresh new look, cedar house trim might be just the thing you need. Cedar house trim is durable, and it's easy to work. Plus, it adds a great natural appeal to your project. However, there are some disadvantages to cedar.
First, cedar can be prone to moisture problems. Even if your siding is well sealed, the wood may start to stain. The cedar's tannic acids can cause this. The tannin acid protects the wood from insects and mold. Tintins can also cause light colored trims to bleed. This can be avoided by painting the wood. You will need to properly prime the wood before you apply a new coat of paint. You may end up with a paint job which is brittle and may flakes if you do not apply primer.
Another issue that can occur with cedar is mildew. It can also be caused by rough handling of cedar during installation. You should use a mild bleach solution in order to prevent it from happening. If the problem persists, you will have to repaint the material.
Cedar can be a breeding ground for pests, in addition to the damage you may cause. This is especially true in an area where there is a lot more rain than your home. Mildew can form on the paint and then be spread over it. Fortunately, there are ways to treat mildew on cedar exterior trim.
Apply a moisture-resistant primer to protect your cedar trim against mildew. Use a product that is specifically made for cedar. An oil-based paint can be used to seal the moisture in your walls. You will need to stain more walls that are exposed to direct sunlight. Living in dusty areas will require you to stain the walls more often.
Finally, it's important to remember that cedar can be susceptible to cracking. Trimming should not be too close to siding. You can also fill in the cracks with exterior caulk. This is the best alternative if the wood is susceptible to cracking.
It is crucial to correctly install cedar trim if you are going to use it. Pre-treating your trim is also a good idea. XT Trim is a preservative treated product that can help to avoid many of the issues associated with cedar. XT Trim can save you the cost of having to call for repairs. The XT Trim is a sturdy, reliable product that will give you better results in every job.
FAQ
Do I need permits to renovate my house?
Yes. Permits will be required for any home-improvement project. In most cases, you will need both a plumbing and building permit. A zoning permit may be required depending on what type of construction you are doing.
Is there any way to save money when renovating my home?
You can save money by doing most of the work yourself. You could, for example, try to reduce the number of people involved in the renovation. It is also possible to cut down on the cost of materials during renovations.
How Much Does It Cost to Renovate A House
The type of material, the project size and the complexity of renovations will all impact the cost. Wood, for example, requires additional tools such as saws and drills. Steel, however is not so dependent. The price of renovations depends on whether you hire a contractor to do the job or if you are willing to do the work yourself.
Home improvements can cost anywhere from $1,000 to $10,000 on average. If you are looking to hire professionals, expect to pay between $5,000 and $25,000. The cost to hire professionals would range from $5,000 to $25,000,000. On the other side, you could spend up to $100,000 if your task is completed entirely yourself.
It is important that you are aware of the many factors that affect the final price of renovations. The cost of renovation depends on the material used (e.g. You can choose between brick or concrete, and the size of your project as well. These are all important factors to consider when estimating renovation costs.
Statistics
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
External Links
How To
Are you renovating the exterior or interior first?
Which one should i do first?
There are many factors to consider when deciding which project to start with. The most common factor when choosing a project is whether it is old or newly built. You should consider the condition and age of the roof, windows, doors, flooring, electric system, etc. There are many aspects to consider when a building is brand new. These include the size and style of the rooms, as well as their location.
If the building has an older roof, it is worth looking at the roof first. If it looks like the roof could collapse any minute now, you may want to start on the renovation. You can proceed to the next step if the roof is in good condition. Next, check out the windows. The windows should be inspected for damage or dirt before you do anything else. After that, you can go through all the doors to make sure they are clear of any debris. If everything looks good, you can start to lay the flooring. You want to make sure the flooring is sturdy and solid so it doesn't break no matter how much you walk on it. The next step is to check the walls. Examine the walls carefully to determine if there are any cracks or other damage. If the wall is in good condition, you can move on to the next step. You can now inspect the ceiling. Make sure the ceiling is sturdy enough to withstand whatever weight you place on it. If all is well, then you are ready to move on to the next phase of your renovation.
If the building was new, you will want to inspect the exterior. Examine the exterior of the house. Is it maintained well? Are there cracks around? Does it look good? If the exterior doesn't look great, then you should definitely fix it. You don’t want to make your home look bad. Next, examine the foundation. You should repair any foundation that appears weak. Also, make sure to inspect the driveway. You want it to be smooth and flat. If it isn't, then you should probably fix it. The sidewalk should be checked as well when you inspect the driveway. It should be replaced if it is uneven.
Once you have completed these inspections, you can now move on inside the house. The kitchen is the first thing you should inspect. Is it clean and well kept? It should be cleaned up if it's messy. Next, make sure to inspect the appliances. The appliances should be in good working order. If they aren’t, you need to either get new ones or fix them. Next, inspect the cabinets. If they are stained or scratched, then you should probably paint them. If they're in good condition, you can move on to the bathrooms. In here, you should check the toilet. If it leaks, then you should probably get a new one. It's best to wash it if it's only dirty. Next, make sure you inspect all the fixtures. Make sure that they are clean. If they are dirty, then you should definitely clean them. Lastly, check the countertops. They should be repainted if they are chipped or cracked. Sealant should be used if the surfaces are smooth and shiny.
The final step is to inspect the furniture. Verify that everything is in good condition. If something is missing, then you should probably find it. If it is damaged, you should probably fix it. Once everything is checked, then you can move back outside and finish the job.